Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Brushless Motor ( 24 to 90 V ) --20 to 200 watts

Status
Not open for further replies.

Nandos

Electrical
Joined
Jun 4, 2003
Messages
14
Location
US
I am looking for Brushless motors to be used as 3 phase Voltage generators to rectify the AC output to charge batteries, at low to moderate RPM (less than 3000 RPM and preferable lower).

Low cost is basically important.

Shape is immaterial, the power source will be Wind Mills or Small hydro Runners.

URLs,Web Pages, Phone numbers and addresses.

Thanks for your assistance.

Nando
 
Hi Nandos

Try POWERTEC website.They have a line of Brushless DC motors that might help you out.

GusD
 
Hi Nando :

Why not to use a 12 or 24 volt auto or truck alterantoror and then convert it to 220 V with a converter ?
Thats the way a friend of mine use it on small hidro power plant.

By this way you can get on the shelf or used product, and speed is not a main problem.

Such alternator run at the variable speed of the car's motor.




Pardal
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top