Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
broken AXIS
- Thread starter luckym
- Start date
- Thread starter
- #3
As I know, you can't break an axis, but maybe you can fix your problem as follow:
1- With the icon "AXIS LINE" create a second axis. Now you have 2 axis (AXIS_1 and AXIS_2)
2- CLick on AXIS_1, Press CTRL key while selecting the axis end point above the dimension text and drag it under.
3- Click on AXIS_2, Press CTRL key while selecting the axis end point under the dimension text and drag it above.
Voilà
DAB
1- With the icon "AXIS LINE" create a second axis. Now you have 2 axis (AXIS_1 and AXIS_2)
2- CLick on AXIS_1, Press CTRL key while selecting the axis end point above the dimension text and drag it under.
3- Click on AXIS_2, Press CTRL key while selecting the axis end point under the dimension text and drag it above.
Voilà
DAB
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question