Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bring a section line in front of a centermark

Status
Not open for further replies.
ableakley

ableakley

Mechanical
Joined
Aug 15, 2014
Messages
5
Location
GB
Hi all,

Is there a way to bring a section line on a drawing in front of the centermark when they overlap, such that the centermark is not visible at the point where it is collinear with the section line? I can't seem to get it to work.

Thanks,
Alex
 
Sort by date Sort by votes
I would normally just edit the centremark with set extensions indivdually, and drop the overlapping extensions down to nothing.

NX 8.5 with TC 8.3
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Question Question
Hide line lables in assembly
Replies
2
Views
4K
Emer4ld
E
N
  • Locked
  • Question Question
Export attributes of items contained in a folder structure in Teamcenter
Replies
2
Views
4K
Rob_N
Rob_N
Befuddled
  • Locked
  • Question Question
Create a lots of ITEMS in TC in bulk
Replies
3
Views
2K
Befuddled
Befuddled
Kenja824
  • Question Question
NX2027 - Is there a fix or is this a Glitch
Replies
4
Views
5K
Rob_N
Rob_N
H
  • Question Question
NXOpen Section view creation
Replies
6
Views
5K
Husky Dusky
H

Part and Inventory Search

Sponsor

Back
Top