Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Branch Splices for Polymeric Transmission Cables

Status
Not open for further replies.
kartracer087

kartracer087

Electrical
Joined
Apr 18, 2020
Messages
72
Location
US
Does anyone know of any manufacturers of solid dielectric type branch splices (wye or tee) for polymeric transmission cables up to 138kV class? I saw that Furukawa Electric of Japan makes solid type branch splices for up to 275kV but was curious if any of the other European cable makers (Prysmian or ABB for example) make a solid type branch splice.

Thanks
 
Status
Not open for further replies.

Similar threads

cyriousn
  • Question Question
Transmission Line Geometry and Impedance/Losses
Replies
7
Views
17K
FPelec
FPelec
alphanumericname
  • Question Question
Experience with Subterranean Transmission Lines (161kV+)
Replies
3
Views
9K
7anoter4
7anoter4
NickParker
  • Locked
  • Question Question
Cables for temporary submersion
Replies
2
Views
508
FacEngrPE
FacEngrPE
NickParker
  • Question Question
Gas tight cables - Gel as filler
Replies
1
Views
3K
7anoter4
7anoter4
A
  • Locked
  • Question Question
Factors affecting Cables insulation resistance testing
Replies
0
Views
2K
Amro Protec
A

Part and Inventory Search

Sponsor

Back
Top