Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bolt selection for halling

Status
Not open for further replies.
Erkamal

Erkamal

Mechanical
Joined
Mar 31, 2003
Messages
63
Location
IN
Hi frds,Api 6A has suggested only ASTM A193 -B7/B7M, ASTM 320, ASTM 453.

can i use ASTM 193 gr. B8S for preventing a galling issue.

I have ASTM 995 gr.J92205 body.and bolting in it
 
Status
Not open for further replies.

Similar threads

E
  • Locked
  • Question Question
Selection of solenoid valve for high pressure and high temperature spray experiment
Replies
0
Views
1K
ethan-111
E
S
  • Locked
  • Question Question
API 6A standard 10000psi ball valve material selection
Replies
4
Views
2K
Sean_Wei
S
A
  • Question Question
Use of Gate Valve for Throttling
Replies
13
Views
13K
georgeverghese
georgeverghese
skengg
  • Locked
  • Question Question
BOLT TIGHTENING TURN TO GET THE REQUIRED FORCE VALUE.
Replies
7
Views
771
skengg
skengg
nicolai
  • Locked
  • Question Question
Safety valve selection hot water
Replies
1
Views
445
The Obturator
The Obturator

Part and Inventory Search

Sponsor

Back
Top