Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Biaxial oriented SAN or PS

Status
Not open for further replies.
federau

federau

Industrial
Joined
Mar 25, 2001
Messages
8
Location
LU
Who knows a manufacturer of biaxial stretched sheets from highly transparent SAN or PS in thicknesses from 2 to 5 mm? I think, this material am better than biaxial strained h-PVC (e.g. ONDEX von Solvay) or PET (cheaper).
federau@web.de
 
Status
Not open for further replies.

Similar threads

Trynix
  • Locked
  • Question Question
How to self-acquire good modeling practices? Also solidworks or NX?
Replies
3
Views
358
dgallup
dgallup
andradesilva
  • Locked
  • Question Question
how to optimize the injection moulding process by coupling MATLAB with Moldex or Moldflow
Replies
0
Views
191
andradesilva
andradesilva
dannyman1982
  • Locked
  • Question Question
High temp water proof Cyanoacrylate or better option
Replies
1
Views
282
Compositepro
Compositepro
Charles West
  • Locked
  • Question Question
Semi-automatic HDPE welding/sanity check
Replies
1
Views
248
MikeHalloran
MikeHalloran
subsearobot
  • Locked
  • Question Question
seeking strain relaxation vs temperature curve for Ultem 1000 or 1010 or 4001
Replies
4
Views
574
mighoser
mighoser

Part and Inventory Search

Sponsor

Back
Top