Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Best links/books for initial laser cutting conditions

Status
Not open for further replies.
cloa

cloa

Petroleum
Joined
Jul 18, 2008
Messages
1,071
Location
JP
Obviously the actual conditions that you cut in practice under will be affected by a multitude of factors but there is always going to be a lot of posts of people cutting something new and needing advice so I propose paraphrasing the answers into FAQ.
 
Status
Not open for further replies.

Similar threads

B
  • Question Question
Will there be problems with the cutting section if the laser cutting speed is too fast or too slow?
Replies
3
Views
450
IRstuff
IRstuff
B
  • Question Question
how to laser cut a cylinder
Replies
0
Views
5K
Bluces
B
Hans H.
  • Locked
  • Question Question
Anti spatter for laser cutting?
Replies
1
Views
1K
Rex Hang
Rex Hang
Pablo_Garcia
  • Locked
  • Question Question
Seeking Guidance: Choosing the Right Laser Cutting Machine for Beginners
Replies
0
Views
921
Pablo_Garcia
Pablo_Garcia
Garrett Green
  • Locked
  • Question Question
Mazak Laser having trouble cutting 1/2" Material
Replies
0
Views
1K
Garrett Green
Garrett Green

Part and Inventory Search

Sponsor

Back
Top