Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

bent bushing in a magne-blast air circuit breaker

Status
Not open for further replies.
ger372

ger372

Electrical
Joined
Sep 13, 2002
Messages
2
Location
MX
I have a magne-blast air circut breaker AM-13.8-1000-4H type, that moves in the right side when placing it in operation position in the switchgear....as can I verify the alignment of the bus, bushings, and the elevating mechanism....thanks...
 
Status
Not open for further replies.

Similar threads

simonfr
  • Locked
  • Question Question
LO/TO - remote circuit breaker
Replies
6
Views
5K
PersonalProfile
PersonalProfile
J
  • Locked
  • Question Question
Utilizing an SF6 circuit breaker as a normally open point
Replies
14
Views
7K
stevenal
stevenal
C
  • Question Question
Dead tank high voltage circuit breakers in Europe
Replies
6
Views
17K
FPelec
FPelec
Yuma
  • Locked
  • Question Question
DC circuit breaker capacity vs time constant
Replies
8
Views
3K
waross
waross
J
  • Question Question
Maximum transformer rating/circuit breakers in parallel configuration - 2nd round
Replies
7
Views
3K
Jpascp
J

Part and Inventory Search

Sponsor

Back
Top