Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bearing strength as a function of temperature for aluminum alloys

Status
Not open for further replies.

kevlar49

Materials
Joined
Jun 1, 2006
Messages
287
Location
US
Does anyone know of a reference I could go to to get bearing strength as a function of temperature for 6061-T651 and 2219 T852 aluminum?
 
how about any correction factor charts?
 
I doubt that this data exists in the public domain. I think you can get yield and tensile vs. temperature from MIL-HDBK-5 or MMPDS-0X. Use the ratio of bearing:tensile at room temp and apply this ratio to the high temp value.
 
thanks tvp. aren't the temperature correction factors in MMPDS only for modulus in the case of 6061 and tensile properties for 2219?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top