Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Beam in Ansys

Status
Not open for further replies.
jstegmann

jstegmann

Mechanical
Joined
Mar 18, 2002
Messages
4
Location
DK
Hi everyone,

I was just wondering if some of you have any experience with obtaining bending-moment diagrams in Ansys. I have figured out a way but it is tedious to say the least. In brief I currently have to define an Element Table with SMISC,6 and SMISC,12 entries and plot the Element Table. This procedure is a bit hard to explain in brief to students...

Has anyone found an elegant way of getting such diagrams?

Regards,

jstegmann.
 
Status
Not open for further replies.

Similar threads

YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
G
  • Locked
  • Question Question
Modelling a post-tensioned stone arch or beam in Strand7
Replies
3
Views
2K
Gigi2000
G
raslraslov
  • Locked
  • Question Question
Setting up units in nCode when importing d3plot (ANSYS)
Replies
0
Views
560
raslraslov
raslraslov
JoeCK
  • Locked
  • Question Question
Slab to beam connection
Replies
0
Views
632
JoeCK
JoeCK

Part and Inventory Search

Sponsor

Back
Top