Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Batch running with Cosmos

Status
Not open for further replies.
R1100S

R1100S

Mechanical
Joined
Aug 18, 2004
Messages
77
Location
US
Hello,

I posted this in the Solidworks Products forum as well, but perhaps someone here can answer me.

I am looking to purchase a FEA progam. Cosmos is very attractive since I already have Solidworks. Can anyone tell me if I can batch run load cases in cosmos? I am familiar with the design tables in Solidworks and am hoping there is something similar in Cosmos. I would like to set up muliply load cases on various geometries and let it run while I do other things.

Thanks.
 
Status
Not open for further replies.

Similar threads

T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
402
SWComposites
SWComposites
G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G
A
  • Question Question
Problem fusing cone with curved geometry in Salomé-Méca (GEOM module)
Replies
0
Views
6K
Aliénor
A
A
  • Locked
  • Question Question
Help with Adaptive Quadrature in Finite Cell Method
Replies
3
Views
2K
rb1957
rb1957
mohamed hassan 2014
  • Locked
  • Question Question
Nonlinear analysis using HyperMesh with OptiStruct
Replies
0
Views
642
mohamed hassan 2014
mohamed hassan 2014

Part and Inventory Search

Sponsor

Back
Top