Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Base Plate Grout
- Thread starter nbryan
- Start date
Suggest you make cubes of the grout and match cure them alongside the base. Then crush them at the times you require to test the strength. If you have already cast the grout then the best I can suggest is a re-batch using the same mix design and test sufficient numbers of cubes until you and your client are satisfied that statistically you are covered for strength. Andy Machon
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question