Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

bar with traverse hole

Thread starter EngForm78
Start date May 23, 2005

Status: Not open for further replies.

May 23, 2005

EngForm78

Mechanical

Has anyone seen benchmarks for a square or round bar in torsion with a traverse hole. I am working on a simplified model of a L-bracket and working up to the more complicated analysis.

The actual part is a "L" bracket with a bolt connection, and thus a bolt hole. The force applied is such that the bolt would pass through the bottom of the "L" and the force would be applied into the page at the top of the L.

THanks in advance

EngForm78