Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Balloon Value not generating

Status
Not open for further replies.

cbell1007

Aerospace
May 30, 2013
18
US
I have assigned part numbers for each piece of DAX foam enclosed in each sub assembly part. I am trying to label them with balloons, with part numbers as the generated value instead of having to label each foam part. I added it in the Style manager, and it works for labeling the sub-assembly parts for example, backrest bottom, cushions armrests etc, but not the foam parts in each sub-assembly. As you can see in the picture below, the balloon part number value is empty. I have enabled my parts list in the B.O.M. thinking that might fix it, and still no luck. Can anyone help?
2i6fnzp.jpg

 
Replies continue below

Recommended for you

Oops. I spoke too soon. Problem solved. My bill of materials for the sub assembly was wrong.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top