Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

B1 & B2 Datums?

Status
Not open for further replies.
3dScanningGuy

3dScanningGuy

Mechanical
Jan 22, 2016
1
I've been tasked with an inspection project with which I have a couple questions. I've attached a couple screenshots of the datums in question. I don't think I've ever seen datums labelled as they are in this print (B1 & B2). More confusingly, datums E and F on the second attachment. I understand the intent of the features being used for datums, but I'm having trouble reconciling the actual callouts. Any ideas or clarification would be great!

Thanks in advance,
Chris

B_C_Datums_yeu6ek.png


E_F_datums_tgsgyt.png
 
Status
Not open for further replies.

Similar threads

AMontembeault
  • Question
Tapered Datums
Replies
3
Views
4K
AMontembeault
AMontembeault
nmine
  • Question
Slot pattern Datums 2
Replies
7
Views
5K
jassco
jassco
F
  • Question
Profile tolerance unless otherwise specified - WRT Datums vs no datums 1
2
Replies
32
Views
8K
Burunduk
Burunduk
Glass_Half_Full
  • Locked
  • Question
How Many Datums are Too Many Datums?
2
Replies
29
Views
2K
greenimi
greenimi
PtoMonty
  • Locked
  • Question
Position tolerance datums 3
2 3
Replies
42
Views
3K
PtoMonty
PtoMonty

Part and Inventory Search

Sponsor

Back
Top Bottom