Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

aws for friction stir

Status
Not open for further replies.
kevlar49

kevlar49

Materials
Joined
Jun 1, 2006
Messages
287
Location
US
Is there an AWS specification that takes the place of MIL-STD-1252? I am welding titanium to 300series stainless so AWS D17.3 does not apply.
 
Status
Not open for further replies.

Similar threads

JoshRanch
  • Question Question
AWS 5.01 Requirements for reviewing Filler Metal Supplier Quality Program
Replies
1
Views
413
David3399
D
AlbertaMecchie
  • Locked
  • Question Question
Looking for AWS equivalent weld procedure and filler material to DIN procedures
Replies
1
Views
407
kingnero
kingnero
pavvpk
  • Locked
  • Question Question
AWS D1.1 weld structure linear dimensional tolerance
Replies
2
Views
1K
gtaw
gtaw
sdra2
  • Question Question
Weld assessment for lifting beam
Replies
0
Views
2K
sdra2
sdra2
Goose123
  • Locked
  • Question Question
UT Substitution for RT - AWS D1.5
Replies
1
Views
299
DekDee
DekDee

Part and Inventory Search

Sponsor

Back
Top