Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AUTOSPC=YES Vs K6ROT=1 in Nastran

Status
Not open for further replies.
rootsandwings

rootsandwings

Automotive
Joined
Jun 18, 2004
Messages
1
Location
US
I got 0.5 Hz higher frquency when I used K6ROT=1 instead of AUTOSPC=YES while working on a structure which has a 1st frequency of about 15 Hz. The model is essentially built with CQUAD4 elements and with a few CHEXA and beam elements.
Please adivse if anyone has a specific recommendation on the choice.

 
Sort by date Sort by votes
My recommendation is to use both commands (K6ROT =10.
and AUTOSPC=YES)
shlr
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

sivasooriyan
Reg. property groups in Autodesk Nastran
Replies
1
Views
8K
IRstuff
IRstuff
sivasooriyan
  • Question Question
Reg. property groups in Autodesk Nastran
Replies
0
Views
8K
sivasooriyan
sivasooriyan
S
  • Question Question
Changing Nastran .f06 file Format
Replies
2
Views
2K
rb1957
rb1957
N
  • Question Question
Patran/Nastran Buckling Analysis – SYSTEM FATAL MESSAGE 7340 (LNNHERR)
Replies
1
Views
6K
ThomasH
ThomasH
A
  • Locked
Patran &Nastran _SOL700
Replies
0
Views
1K
ALIreza_1999
A

Part and Inventory Search

Sponsor

Back
Top