I found a great SW add-in which will automatically save .pdf, .dwg, and .dxf to a specified folder everytime I save a drawing. This reduces alot of time saving over and over in multiple formats. I am wondering if anyone knows of an add-in which will save and .iges file to a specified location everytime I save a part or assembly.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Automatically Save multiple formats of files
- Thread starter Ziggy749
- Start date
It is probably just a simple tweak to your existing macro. You should post the code. There are users here that are probably willing to help you through the process... and as a bonus, you will get to learn a little about the code.
-Dustin
Professional Engineer
Pretty good with SolidWorks
-Dustin
Professional Engineer
Pretty good with SolidWorks
- Thread starter
- #3
I used a program which has already been created called SWupBB. Here is the link to the download. If I could modify the code for the program to add .igs that would be great, or another standalone program works too.
Here is the link:
Here is the link:
E-mail the developer... A very good chance he can add that to his code.
Anna Wood
Xeon W3680, Nvidia Quadro 4000, 12 Gb RAM, WD Velociraptor, Dell U3011 Monitor
SW2011 SP1, Windows 7 x64
Anna Wood
Xeon W3680, Nvidia Quadro 4000, 12 Gb RAM, WD Velociraptor, Dell U3011 Monitor
SW2011 SP1, Windows 7 x64
- Status
Similar threads
- Locked
- Question
- Question