Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AUTOMATIC RECOGNITION OF SURFACES

Status
Not open for further replies.
Ard88

Ard88

Mechanical
Joined
Mar 31, 2020
Messages
10
Location
GB
OK, I am quite new to Catia, automotive.. complex parts..

My question is: there is a tool to highlight the surfaces of a component (similar to what happens in sheetmetal) so, for example the planar surfaces in blue, the cyclindrical surfaces in green... and all the other surfaces unchanged. Is it possible?

Thanks y'all!

ARD
 
Status
Not open for further replies.

Similar threads

LeoVyc
  • Locked
  • Question Question
Equal holes from part recognition
Replies
1
Views
377
Little Cthulhu
Little Cthulhu
xPAIVAx
  • Locked
  • Question Question
Automatic Rename CATIA V5
Replies
0
Views
1K
xPAIVAx
xPAIVAx
DiaeArrahmane
  • Locked
  • Helpful tip Helpful tip
CATIA MACRO: Offset of multiple Surfaces
Replies
0
Views
347
DiaeArrahmane
DiaeArrahmane
jzecha
  • Locked
  • Question Question
Error Extracting Surfaces from a Search
Replies
8
Views
773
jzecha
jzecha
Eisengrindt
  • Locked
  • Question Question
Creating a pad on inclined side surfaces
Replies
2
Views
517
Wuzhee
Wuzhee

Part and Inventory Search

Sponsor

Back
Top