Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Autodesk Simulation Mechanical: Analysis Failed

Status
Not open for further replies.

bigBboris

Mechanical
Feb 26, 2004
65
New to this program.
I am trying to run an old thermal analysis created by my predecessor, and it fails after few seconds of running. There is a note "Analysis Failed" next to design scenario name, and no more info.
How I can look at what's wrong?
Could not find anything in Help.
Thanks,

Boris.
 
Replies continue below

Recommended for you

If you look in that folder you should see a bunch of files with a recent creation date, which are actually text files. If you are lucky one is called .log, have a read of that.

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376
 
No luck, no log file. Any other places?

Boris.
 
One issue might be that the log files are turned off

TTFN
faq731-376
7ofakss

Need help writing a question or understanding a reply? forum1529
 
How to turn on log files? For SCR=NO, where should I type it?

Boris.
 
Don't know, I haven't used a mickey mouse FEA package. The user interface for mine consists of a single line of text.

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor