Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Auto Moisture Purge for Pitot Tubes

Status
Not open for further replies.
nagarajh

nagarajh

Mechanical
Joined
Dec 10, 2003
Messages
18
Location
US
Hi
I have a stack that uses self averaging pitot tubes to measure the stack mass flow rate and sends a HART signal (4-20mA). I want to know if there is a company that manufactures Auto-Moisture purging system for the pitot tubes. Hot gases will be flowing through the stack.

Thanks
 
Status
Not open for further replies.

Similar threads

FluidME
  • Locked
  • Question Question
Stand-by Pump auto-change over pressure set point
Replies
5
Views
2K
LittleInch
LittleInch
jgilrod
  • Locked
  • Question Question
How to model flexible tubes (metal hoses) in CAESAR?
Replies
8
Views
2K
Piper Mike
Piper Mike
S
  • Locked
TUBE TO TUBESHEET MOCK UP PROCEDURE FOR HEAT EXCHANGER
Replies
0
Views
716
sameerjoshi1969
S
Yomahuta
  • Locked
  • Question Question
Turbine Lube Oil Moisture and Dust Removal
Replies
6
Views
496
FacEngrPE
FacEngrPE
S
  • Question Question
Pipe wall thickness calculation method for t≥D/6 or for P/SE>0.385
Replies
5
Views
13K
goutam_freelance
goutam_freelance

Part and Inventory Search

Sponsor

Back
Top