Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM A283GrC for low temperature

Status
Not open for further replies.

SergioNeves

Chemical
Joined
Jul 5, 2012
Messages
3
Location
BR

I have an existing vessel of A283GrC and I intend to use it for Propane at ambiente temperature (min 14 C). In case of depressurizing to atmosphere, temperature can be as low as -42 C due to evaporative effect. The minimum temperature reported by ASME for this material is -20 F(-29 C). Can I use this vessel for this service?



 
No. This would be considered an alteration because the minimum design metal temperature is being lowered - rerated. This material would require impact testing to be performed to support an alteration for a pressure vessel. Because A 283 Grade C material will not achieve the necessary impact energy requirements at -42 deg C, it could not be used for this service condition.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top