Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASTM A234 - Tensile Requirements?
- Thread starter alanyoung
- Start date
In the latest revision of this standard (2002), Chemical Composition is covered in Section 8 and Tensile Requirements in section 9. Section 9.2 requires 1 tensile test be performed on each heat of material, and Section 9.3 discusses the requirements for cold formed fittings.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
