Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM A194 2H Nuts

Status
Not open for further replies.
lahpe65

lahpe65

Structural
Jan 3, 2003
46
I have found conflicting information regarding whether or not A194 Grade 2H can be galvanized. Can someone give me some guidance on this?

Thanks in advance.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
The guidance you need is referenced in ASTM A/SA-194. Please review this document, it references coatings and their limitations.
 
Upvote 0 Downvote
From what I read, A194 2H galvanized nut is a valid substitution for the A563 galvanized nut? Are there any loopholes I should be aware of?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Fuzzbox 100
  • Locked
  • Question
A194 Gr. 2H or Gr.7 nuts - Low Temperature Operation 1
Replies
5
Views
1K
Fuzzbox 100
Fuzzbox 100
jietepipefittings
  • Locked
  • Question
SLIP RING RJ 36" CL900 ASTM A240 GR.304/304L
Replies
3
Views
474
LittleInch
LittleInch
SimonRuda
  • Locked
  • Question
Question ASTM ASME Edition ASTM A312/A312M:2019 and ASME SA-312/SA-312M:Edition 2019 - Compatible
Replies
3
Views
556
david339933
david339933
jennin77
  • Locked
  • Question
Vibration loosening of bolts/nuts of B16.5 or ASME VIII bolted connections 1
Replies
1
Views
220
XL83NL
XL83NL
gwalkerb
  • Locked
  • Question
B31.8 Hoop Stress Calculations with MSS SP-75 / ASTM A860 fittings or MSS SP-44 / ASTM A694 flanges
Replies
4
Views
611
GBTorpenhow
GBTorpenhow

Part and Inventory Search

Sponsor

Back
Top Bottom