Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Assigning Ref des

  • Thread starter Thread starter red devil
  • Start date Start date
R

red devil

Guest
Does anyone know if there is a way to assign reference designators to parts in an assembly?


TIA


RD
 
In an assembly, go to edit>setup, and there should be a menu choice called "component name". Select the part, and you should be prompted for a new name.


To verify: edit the model tree options to display a column for ecad: ref_des and it should now show the updated name


If you are exporting this in IDF to an ECAD tool (mentor, allegro, etc.) the ref des parameter will be translated as well.


Let me know how this works out...
 
My ignorance prompts me to ask:

What is "reference designators"? And what's it used for?

Can you please give me an example?
 
Got it sorted thanks.


Reference Designators are used in electronic design when referencing IC's, connectors, resistors etc, eg, R1, R2, R3 etc for resistors. This data can be exported from ProE to a PCB layout tool.
 
red devil said:
Got it sorted thanks.


Reference Designators are used in electronic design when referencing IC's, connectors, resistors etc, eg, R1, R2, R3 etc for resistors. This data can be exported from ProE to a PCB layout tool.

If I understood, is it like a Commodity Code such as letter R is for resistor, letter C is for Capacitor?
 
Yup, thats right.
 
red devil said:
Yup, thats right.

Thanks Red Devil. Learn a new thing today.

Your title is Contributor with 96 posts. I think, with 4 more to 100, you get a bump to Veteran.

smiley32.gif
 
Best get posting more then....theough not sure if I want to be a veteran....it sounds old!
smiley2.gif
 
trillicomm said:
red devil said:
Got it sorted thanks.


Reference Designators are used in electronic design when referencing IC's, connectors, resistors etc, eg, R1, R2, R3 etc for resistors. This data can be exported from ProE to a PCB layout tool.

If I understood, is it like a Commodity Code such as letter R is for resistor, letter C is for Capacitor?


That is exactly correct. It is a standard identification method used when designing circuit boards and other electronic devices, as defined by ANSI Y32.16-1975/IEEE 200-1975.


Hope this helps!
 

Part and Inventory Search

Sponsor

Back
Top