Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

asme b31.3 test pressure

Status
Not open for further replies.
gravitate

gravitate

Mechanical
Joined
Aug 17, 2012
Messages
80
Location
FR
Hi we have cooling water on site. Some of it is safety classified Cat M and some just normal process water. When doing hydro tests on both the systems is there any difference or are they all at 1.5 the design pressure?
 
Sort by date Sort by votes
Gravitate,
Suggest you have a look in Category M - the answer is quite easy to find.
You will not learn anything by posting a question without having a look first,
Regards,
Kiwi
 
Upvote 0 Downvote
point taken. But I have only just got a copy today. Could have done with the answer sooner :(
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jayinwww
  • Question Question
Calculating Stress Ratio ASME B31.3 Figure 323.2.2A Note 6
Replies
0
Views
492
jayinwww
jayinwww
bck2ftr
  • Question Question
ASME B16.9 - factor f for proof test
Replies
3
Views
11K
goutam_freelance
goutam_freelance
T
  • Question Question
Figure 323.2.2-2 (Reduction in Lowest Exemption Temperature for Steels Without Impact Testing) of ASME B31.3
Replies
0
Views
7K
Tommy2025
T
Drilling Integrity Super.
  • Locked
Formula for Calculating Basic Allowable Stresses in ASME B31.3
Replies
2
Views
5K
Geoff13
Geoff13
Mustakim
  • Locked
  • Question Question
ASME B31.3 Impact testing for SS304 with MDMT of -165degC
Replies
0
Views
1K
Mustakim
Mustakim

Part and Inventory Search

Sponsor

Back
Top