Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASME B31.3 revision 1
- Thread starter smitch
- Start date
Its belated a bit. Planned for July 2019, but that’s already halfway.
- Thread starter
- #3
BeckActuators
Mechanical
ASME B31.3 revision is planned for July 2019
Electric Actuator You Can Depend On
Electric Actuator You Can Depend On
-
1
- #6
McDermott1711
Mechanical
It is released.
Link
Key changes to this revision include:
1) Additional of Appendix W – High Cycle Fatigue Assessment of Piping Systems
2) Metric conversion added for Table C-6, Moduli Table
3) Metric conversions added for Appendix C Thermal Expansion
4) Major updates to the stress tables in A-1, A-1M, K-1
5) Para. 323.2.2 Rules for Impact Testing of Materials was updated to correct inconsistencies, and incorporate current approaches to impact testing exceptions of materials
6) Reference to the new B31J-2017 added
7) Allow alternate rounding approaches for units of measurement
8) Update the Larson Miller constant for Grade 91 (9Cr-1Mo-V) material
9) Update Appendix D – Flexibility and Stress Intensification Factors
10) Add titanium Grade 12 to Table A-1 and Table A-1M
Nothing is more fairly distributed than common sense: no one thinks he needs more of it than he already has. Rene Descartes
Link
Key changes to this revision include:
1) Additional of Appendix W – High Cycle Fatigue Assessment of Piping Systems
2) Metric conversion added for Table C-6, Moduli Table
3) Metric conversions added for Appendix C Thermal Expansion
4) Major updates to the stress tables in A-1, A-1M, K-1
5) Para. 323.2.2 Rules for Impact Testing of Materials was updated to correct inconsistencies, and incorporate current approaches to impact testing exceptions of materials
6) Reference to the new B31J-2017 added
7) Allow alternate rounding approaches for units of measurement
8) Update the Larson Miller constant for Grade 91 (9Cr-1Mo-V) material
9) Update Appendix D – Flexibility and Stress Intensification Factors
10) Add titanium Grade 12 to Table A-1 and Table A-1M
Nothing is more fairly distributed than common sense: no one thinks he needs more of it than he already has. Rene Descartes
- Status
Similar threads
- Locked
- Question
- Locked
- Locked
- Question