Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME B16.5 Tolerances

Status
Not open for further replies.
oguzzz

oguzzz

Mechanical
Joined
Mar 1, 2020
Messages
15
Location
TR
What is the tolerance for inside and outside diameter of machining spiral wound gasket surface due to ASME B16.5 (For 6” nozzle). I saw exact measurements without tolerance regarding standard.

Thanks.
 
Sort by date Sort by votes
oguzzz, you are talking about the raised face, correct? It is addressed para 7.3 Facings (per 03 Ed).

Regards,

Mike

The problem with sloppy work is that the supply FAR EXCEEDS the demand
 
Upvote 0 Downvote
Correct, I mean raised face. Thanks for quick reply.

Regards.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

L
  • Locked
  • Question Question
ASME B16.5 Flange Hole Chamfering
Replies
7
Views
2K
Compositepro
Compositepro
JT0202
  • Locked
  • Question Question
ASME QG-106.4
Replies
2
Views
2K
DekDee
DekDee
timsch
  • Question Question
ASME SEC.IX WPS filler designation
Replies
3
Views
615
DekDee
DekDee
bck2ftr
  • Question Question
ASME B16.9 - factor f for proof test
Replies
3
Views
11K
goutam_freelance
goutam_freelance
Khalid Hameed
  • Locked
  • Question Question
ASME B 31.3 and ASME B31.8
Replies
4
Views
2K
Khalid Hameed
Khalid Hameed

Part and Inventory Search

Sponsor

Back
Top