Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME 1971 B31.3

Status
Not open for further replies.
SnazyDragon

SnazyDragon

Mechanical
Joined
Aug 13, 2018
Messages
15
Location
CA
Can anyone help me to find the chart for minimum pipe wall thickness for various nominal pipe sizes? Does it even exist in this version?

TIA
 
Sort by date Sort by votes
The oldest version I have of B31.3 is from '80. There are no such tables in there. Cant imagine there would be such a table for that
 
Upvote 0 Downvote
you need to use pipes dimensional standards: ASME B36.10M for CS, and ASME B36.19M for SS pipes.
 
Upvote 0 Downvote
I think (but I’m guessing here) the OP meant if there would be a table in B31.3-1971 which is similar to ASME VIII-1 UG-something, where it has minimum nozzle wall thicknesses. The B36 standards is probably not what the OP is after.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JARivera1
  • Locked
  • Question Question
ASME B31.3-2016 PWHT Exemption
Replies
6
Views
6K
JARivera1
JARivera1
S.G
  • Locked
  • Question Question
Category M (ASME B31.3)
Replies
2
Views
2K
S.G
S.G
Drilling Integrity Super.
  • Locked
Differences in Minimum Allowable Stresses in ASME B31.3 for Low and High Pressure
Replies
3
Views
3K
GD2
GD2
T
  • Locked
  • Question Question
ASME B31.3 | Titanium Values of Coefficient Y | Table 304.1.1
Replies
1
Views
1K
GD2
GD2
charles_ac
  • Locked
  • Question Question
ASME B31.3 2018 - Minimum impact test exemption temperature reduction
Replies
7
Views
4K
GD2
GD2

Part and Inventory Search

Sponsor

Back
Top