Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASET cards are not exported from Femap

Status
Not open for further replies.
ewromano

ewromano

Aerospace
Joined
May 17, 2018
Messages
1
Location
US
I am running Femap11.8.2 and I have created three Craig Bampton models and I am trying to export the superelements to run NX Nastran. When I look at the bulk data deck, I only see a heading for the ASET cards but no entries. The SPOINTS and QSETS work however.
 
Sort by date Sort by votes
There is a Siemens: Femap board, maybe your question would be more appropriate there
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

EKCP
  • Question Question
TABLES1 limited number of stress/strain entries for SOL 401 Using FEMAP 24.06
Replies
6
Views
15K
rb1957
rb1957
Salvenheit01
  • Locked
  • Question Question
FEMAP: Create CFAST at multiple points
Replies
0
Views
971
Salvenheit01
Salvenheit01
Dasher99
  • Locked
  • Question Question
FEMAP Fastener Modeling
Replies
4
Views
1K
BlasMolero
BlasMolero
Xprivate
  • Locked
  • Question Question
FEMAP SUBSTEP/MULTISTEP/Multiple loadcases for same BCs
Replies
4
Views
562
ThomasH
ThomasH
willindsey
  • Locked
  • Question Question
Defining FEMAP Material Orientations for Curved Shell Model
Replies
5
Views
1K
jotunn
jotunn

Part and Inventory Search

Sponsor

Back
Top