Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Area of a face

Status
Not open for further replies.
seaaggie

seaaggie

Structural
Joined
Dec 21, 2010
Messages
44
Location
US
Is there a way to find the area of a face in .cae?
Thanks

Thanks,
Mark
 
Sort by date Sort by votes
Yes, use Query --> Mass properties, switch to "Select geometric regions" and change selection type to Faces. Then pick a face and click Done.
 
Upvote 0 Downvote
thanks FEA way!


Thanks,
Mark
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Vishakh_Rajendran
  • Question Question
Convergence of SIF results for a Composite
Replies
5
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran
Smadar11
  • Locked
  • Question Question
ABAQUS- stractural model- fine elements in crack area
Replies
3
Views
397
FEA way
FEA way
jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
757
FEA way
FEA way
F
  • Question Question
Purpose of Reaction Force in ABAQUS
Replies
2
Views
2K
FEA way
FEA way
P
  • Locked
Information about Mapping Stress from one simulation result to another geometry ( which is a trimmed version of previous geometry)
Replies
2
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top