Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Are the former USSR designers as good as ....

  • Thread starter Thread starter -
  • Start date Start date
Status
Not open for further replies.

Guest
Dear Collegues,

do you think the former USSR moulds designers are goog enough?

are them welll fameliarized with up-to-date designing programs like AutocadDesktop,pro-enngineering,masterCam,SolidWorks ets?

I should be much obliged if you could let me know your opinion on this subject.

As for me, I think they are goog proffessionals and are able to work as well as European or American designers with no problems.

C u soon.
uratu@yahoo.com
 
Status
Not open for further replies.

Similar threads

titan0106
  • Locked
  • Question Question
unidentified liquid rsidual on the surface of connectors (PA66+30GF injection molded)
Replies
1
Views
948
Pud
Pud
skengg
  • Locked
  • Question Question
THERMOPLASTIC COMPONENT PART CRACK
Replies
12
Views
2K
skengg
skengg
mah1975
  • Locked
  • Question Question
Some bubbles get popped in the forming roller after extrusion of the bubble-wrap
Replies
1
Views
740
Mykolaj
Mykolaj
StG10
  • Locked
  • Question Question
Hi , we are developing the blister
Replies
11
Views
416
John2025
John2025
Mistahcox
  • Locked
  • Question Question
How do extrusion processing conditions impact the elongation properties of Nylon 12?
Replies
6
Views
814
Felix Wang
Felix Wang

Part and Inventory Search

Sponsor

Back
Top