Jul 2, 2009 #1 PelletKing Mechanical Joined Jul 2, 2009 Messages 1 Location IE Can anyone tell me if a hydronic boiler, if used in a private residence is required to be ASME H stamped if it is used on an open vented system i.e. atmospheric pressure ? Or are there exemptions ??
Can anyone tell me if a hydronic boiler, if used in a private residence is required to be ASME H stamped if it is used on an open vented system i.e. atmospheric pressure ? Or are there exemptions ??
Jul 2, 2009 #2 JohnBreen Mechanical Joined Jul 24, 2002 Messages 949 Location US It depends upon the jurisdiction. Contact info here: http://www.nationalboard.org/ViewOurMembers.aspx Upvote 0 Downvote
It depends upon the jurisdiction. Contact info here: http://www.nationalboard.org/ViewOurMembers.aspx