Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Arc Magnet, Radial aligned vs Diametral

Status
Not open for further replies.
RHMagster

RHMagster

Materials
Joined
Jun 20, 2005
Messages
15
Location
US
What is better for a motor application, when PM's are used, radial alignment of the arc or diametral, as for acheiving the best torque and speed for a given material property ?

The arcs are located on the stator.

Thanks
 
Status
Not open for further replies.

Similar threads

TomXY
  • Locked
  • Question Question
Radial Ring in Ring Magnet
Replies
1
Views
967
MagBen
MagBen
Catrin
  • Locked
  • Question Question
how to make an impulse magnet without removing the rest assembly
Replies
5
Views
1K
MagBen
MagBen
Clyde38
  • Locked
  • Question Question
Magnet saturation at magnetization
Replies
6
Views
1K
Clyde38
Clyde38
DJI66
  • Locked
  • Question Question
Welding: Using 304L vs 304L VIM/VAR
Replies
4
Views
965
EdStainless
EdStainless
Clyde38
  • Locked
  • Question Question
Magnet shape with respect to calculating intrinsic flux density
Replies
9
Views
694
MagBen
MagBen

Part and Inventory Search

Sponsor

Back
Top