Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API Syntax for composite girder

Status
Not open for further replies.
Imran Structural Engineer

Imran Structural Engineer

Civil/Environmental
Joined
Jun 8, 2021
Messages
28
Location
PK
Is there any specific syntax to get girder forces of a bridge. CSi's documentation covers beam and area element, however the composite action of the two not covered anywhere.
Any sort of help and guidance will be highly appreciated.
 
Status
Not open for further replies.

Similar threads

GJoeRMK
  • Question Question
A Sap2000 API question, SapObject.SapModel.SolidObj.AddByCoord()
Replies
2
Views
2K
GJoeRMK
GJoeRMK
A
  • Locked
  • Question Question
CSI BRIDGE "Design request" for Precast Concrete I Girder bridge does not work when the defined beam is nonprismatic !!!
Replies
0
Views
872
Abderrahmane Mche
A
K
  • Question Question
C# SAP2000 API v26.2.0 - Load Patterns Not Appearing in "Load Pattern Definitions" Table Despite Being Created
Replies
0
Views
6K
keremsari
K
kiranraj
  • Locked
  • Question Question
Modeling Composite Slab in SAP2000
Replies
0
Views
427
kiranraj
kiranraj
a_urbs
  • Locked
  • Question Question
Using Section Cuts in SAP for Storey Weight
Replies
0
Views
1K
a_urbs
a_urbs

Part and Inventory Search

Sponsor

Back
Top