Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 686 Max number 5 shim requirement

Status
Not open for further replies.
Matchess

Matchess

Industrial
Joined
Sep 21, 2011
Messages
21
Location
FR
Hi

Someone know the technical reason about the maximum 5 shims requirement number under machine foot (potential untightening screw problem ?)specified in API686).
same question about the maximum shim thickness of 12 mm ?

Regards
 
Status
Not open for further replies.

Similar threads

shvet
  • Locked
  • Question Question
API 686 temporary strainers
Replies
3
Views
842
shvet
shvet
J
  • Question Question
API PLAN SELECTION
Replies
0
Views
3K
jr.keng
J
Pragnyasu jena
  • Locked
  • Question Question
Can we use shim under positive disp
Replies
5
Views
471
LittleInch
LittleInch
J
  • Question Question
API 676 MULTIPHASE PUMP MOC & NPSH
Replies
8
Views
5K
Snickster
Snickster
AspenMech
  • Locked
  • Question Question
API stamp for API 610 pumps
Replies
3
Views
1K
1503-44
1503-44

Part and Inventory Search

Sponsor

Back
Top