Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 650

Status
Not open for further replies.
HardikPandya

HardikPandya

Mechanical
Apr 13, 2015
3
can any1 suggest me how to calculate Wint= Design uplift load due to product prssure per unit circumferential length(n/mm) for Anchorage Ratio J (E.6.2.1.1.1). I stuck in calculation as there is no clarification is given regarding Wint in API-650.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Pressure times projected roof area divided by circumference with attention to units ought to do it.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

oldisgold981
  • Locked
  • Question
API 650 MW moment
Replies
1
Views
2K
Geoff13
Geoff13
oldisgold981
  • Locked
  • Question
API 650 Compression area
Replies
3
Views
2K
oldisgold981
oldisgold981
eberger
  • Locked
  • Question
API 650 5.12.2 uplift per anchor
Replies
8
Views
5K
HTURKAK
HTURKAK
oldisgold981
  • Locked
  • Question
API 650 design using TANK software
Replies
8
Views
3K
zelgar
zelgar
oldisgold981
  • Locked
  • Question
TEST PRESSURE API 650 APPENDIX F
Replies
1
Views
1K
JStephen
JStephen

Part and Inventory Search

Sponsor

Back
Top Bottom