Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 650

Status
Not open for further replies.
HardikPandya

HardikPandya

Mechanical
Joined
Apr 13, 2015
Messages
3
Location
CA
can any1 suggest me how to calculate Wint= Design uplift load due to product prssure per unit circumferential length(n/mm) for Anchorage Ratio J (E.6.2.1.1.1). I stuck in calculation as there is no clarification is given regarding Wint in API-650.
 
Sort by date Sort by votes
Pressure times projected roof area divided by circumference with attention to units ought to do it.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
API 650 Nozzle on weld joint
Replies
2
Views
12K
Oscarvs
Oscarvs
M
  • Question Question
convert BS EN1998-1 data to API 650
Replies
1
Views
412
HTURKAK
HTURKAK
oldisgold981
  • Locked
  • Question Question
API 650 MW moment
Replies
1
Views
2K
Geoff13
Geoff13
oldisgold981
  • Locked
  • Question Question
API 650 Compression area
Replies
3
Views
2K
oldisgold981
oldisgold981
eberger
  • Locked
  • Question Question
API 650 5.12.2 uplift per anchor
Replies
8
Views
5K
HTURKAK
HTURKAK

Part and Inventory Search

Sponsor

Back
Top