Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 650 Two-Side Welding

Status
Not open for further replies.
JXWu

JXWu

Petroleum
Joined
Oct 26, 2015
Messages
24
Location
TH
Dear experts,
Is it a API 650 requirement that the second side of a double-side welded joint needs to be back-chipped at least one-third of the joint thickness?
I cannot find this requirement in the API 650 12th edition. Need advice.
Thanks
 
Sort by date Sort by votes
Dear JXWu,

Are you constructing a double-walled dome roofed tank?

Regards.

DHURJATI SEN
Kolkata, India

 
Upvote 0 Downvote
This is a API 650 single wall cone roof tank
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Engingeeer
  • Question Question
nut welding fixture
Replies
2
Views
13K
Engingeeer
Engingeeer
infometrix
  • Locked
  • Question Question
NDE after welding (delay) as per API 1104
Replies
11
Views
4K
r6155
r6155
IdanPV
  • Question Question
Welding of S355JR
Replies
1
Views
423
kingnero
kingnero
SAEEDGH
  • Question Question
stud welding manufacture process
Replies
3
Views
656
mfgenggear
mfgenggear
I
  • Solved
Hardfacing overlay welding - Procedure qualification
Replies
5
Views
9K
ilkerdburhan
I

Part and Inventory Search

Sponsor

Back
Top