Anyway to bring in a Point File (digitized)

[Rocko1]

Is there a way to bring in a digitized point file into solidworks 2007 so i can use the digitized points to use the points for sketch geometry? Thanks

 

[CorBlimeyLimey]

Point cloud macros;

http://mysite.verizon.net/mjlombard/

http://solidworks.cad.de/mm_24.ht

 

[Theophilus]

I thought you meant a point file--like the thing you use to remove material from ignition points for improved ignition.




Jeff Mowry

http://www.industrialdesignhaus.com

Reason trumps all. And awe trumps reason.

 

[Rocko1]

CorBlimey, thanks. I am confused how to get it to work though? Can you help.

 

[Rocko1]

I figured it out, you need to hard code the location of the file. I wonder if their is a way for an input box to show up for you to tell it where to look? I am not a big macro creator guy.

 

[Theophilus]

I don't know if this would be useful, but it's only $30--may be worth a shot. It looks like you'd still need to create your own curves, etc. from the points, but maybe not:

http://www.turbosquid.com/FullPreview/Index.cfm/ID/304781

Jeff Mowry

http://www.industrialdesignhaus.com

Reason trumps all. And awe trumps reason.