Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Anyone have experience with new Umicore braze alloys?

Status
Not open for further replies.
tomwalz

tomwalz

Materials
Joined
May 29, 2002
Messages
947
Location
US
Just saw them yesterday. Trying to get info.

Thank you,
Tom

Thomas J. Walz
Carbide Processors, Inc.

Good engineering starts with a Grainger Catalog.
 
Status
Not open for further replies.

Similar threads

KVARM
  • Locked
  • Question Question
Aluminium Honeycomb Panel with Aluminium Extrusion Welding
Replies
4
Views
2K
kingnero
kingnero
D
  • Locked
  • Question Question
steel weld filler and process with extremely machinability
Replies
2
Views
2K
dtimberlake
D
RonOz
  • Locked
  • Question Question
Should pipe based structures (RHS SHS CHS) be sealed or have their ends left open?
2
Replies
20
Views
2K
RonOz
RonOz
Y
  • Locked
  • Question Question
A extremely thin layer of adhesive between two steel plate with the pressure by Abaqus
Replies
0
Views
954
Yao Lingbo
Y
Mr_Curious
  • Locked
  • Question Question
Threaded hole with cutout on the outer surface of a rotor
Replies
6
Views
806
Tmoose
Tmoose

Part and Inventory Search

Sponsor

Back
Top