Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Any body got a good Pipe line class spec for Plastic pipes

Status
Not open for further replies.

Naren

Mechanical
Joined
Oct 21, 1999
Messages
14
Location
ZA
Has any body got a good Pipe line class spec for plastic pipes? Lines are typically used in water treatment facilities for acids, HCL, H2SO4, Caustic etc.

Typical materials: HDPE, LDPE, uPVC, etc


Require specification for:
service:
Pipes in different diameters,
Valving,
fittings
flanges,
gaskets,
bolts,

Thanks in advance
Regards
Naren

Naren Sukaih
naren.sukaih@sapref.com

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top