ANSYS solver

[wilduser]

I

 

[Remmerv]

For the ANSYS or NASTRAN solver you will need the software from ANSYS/NASTRAN and the according ANSYS/NASTRAN license to run the solver. Pro/MECHANICA FEM mode only acts as a pre-processor to create a model to run with the ANSYS or NASTRAN Solver. Note that Pro/MECHANICA wil require a specific version of these solvers, the latest version may not work (can be found on the PTC pages).

 

[Israr]

Remmerv is right.



ANSYS 8.0 is the last release to support ANSYS/ProFEA





Israr

 

[kiran1810]

http://www.ptc.com/partners/hardware/current/prom.htm





you can follow this link where the details of the FEM solvers have been given.





regards,


satya