Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS fluid-structure interaction

Status
Not open for further replies.
NICOARG

NICOARG

Mechanical
Joined
Jul 9, 2011
Messages
1
Hi everyone,

I am working in fluid-structure interaction using ANSYS 13. I use it to obtain natural frequencies of structures submerged in water. The modal analysis results are good, but I can´t see the fluid pressure in the output, only the displacements. Do I have to use a command to display the pressure in the output?

Thanks!
 
Status
Not open for further replies.

Similar threads

YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
429
SWComposites
SWComposites
netsonicyxf
  • Locked
  • Question Question
Why the symmetrical structure under self weight has unsymmetrical deformation?
Replies
3
Views
3K
netsonicyxf
netsonicyxf
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
Sparky4598
  • Locked
  • Question Question
Materials database for Ansys mechanical
Replies
2
Views
516
Sparky4598
Sparky4598

Part and Inventory Search

Sponsor

Back
Top