Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS fluid-structure interaction

Status
Not open for further replies.
NICOARG

NICOARG

Mechanical
Jul 9, 2011
1
Hi everyone,

I am working in fluid-structure interaction using ANSYS 13. I use it to obtain natural frequencies of structures submerged in water. The modal analysis results are good, but I can´t see the fluid pressure in the output, only the displacements. Do I have to use a command to display the pressure in the output?

Thanks!
 
Status
Not open for further replies.

Similar threads

T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
239
SWComposites
SWComposites
netsonicyxf
  • Locked
  • Question
Why the symmetrical structure under self weight has unsymmetrical deformation?
Replies
3
Views
3K
netsonicyxf
netsonicyxf
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
Sparky4598
  • Locked
  • Question
Materials database for Ansys mechanical
Replies
2
Views
408
Sparky4598
Sparky4598
raslraslov
  • Locked
  • Question
nCode Designlife Materials and LS-Dyna d3plot (ANSYS)
Replies
0
Views
467
raslraslov
raslraslov

Part and Inventory Search

Sponsor

Back
Top Bottom