Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS 18.2 Student Importing problem

Status
Not open for further replies.
tlwhite0311

tlwhite0311

Mechanical
Joined
Jan 4, 2018
Messages
9
Location
US
I can import geometry via step or iges file but when I go to mesh in Mechanical or edit Setup Fluent I can't see any model. Attached are what I'm seeing. Any help would be appreciated.

workbench_ohynx0.jpg
mechanical_pavp1d.jpg
fluent_n6pqby.jpg
 
Sort by date Sort by votes
If no any warning/error message shows up, and this issue persists with many trials, then it seems a software defect.
 
Upvote 0 Downvote
You could try reinstalling the software or try previous Revs.


Good luck,
Jason
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
418
struclearner
struclearner
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top