Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Angular velocity in ANSYS

Status
Not open for further replies.
AFA11

AFA11

Mechanical
Joined
Apr 27, 2011
Messages
4
Hello All,
I am trying to give rotational angular velocity to roller in ANSYS, but its not rotating. I have created local coordinate system by using standard inertia load commands but its picking only global coordinate system. Any suggestions how to turn something in ANSYS pls......
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
matparta
  • Locked
  • Question Question
Nodal velocity as boundary condition
Replies
3
Views
5K
matparta
matparta
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
raslraslov
  • Locked
  • Question Question
Setting up units in nCode when importing d3plot (ANSYS)
Replies
0
Views
566
raslraslov
raslraslov
Sparky4598
  • Locked
  • Question Question
Materials database for Ansys mechanical
Replies
2
Views
505
Sparky4598
Sparky4598

Part and Inventory Search

Sponsor

Back
Top