Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analysis Incomplete!!

Status
Not open for further replies.
jackyyau

jackyyau

Civil/Environmental
Joined
May 13, 2002
Messages
38
Location
HK
I got a .s2k model exported from SAP2000 version 7.4 non-linear. This model runs well in Ver 7.4, however, when this .s2k inputs into Ver7.12 (SAP2000 NL), there is an error when SAP solves the model as follows:

Analysis Incomplete!!

Why and what goes wrong?
 
Sort by date Sort by votes
Don't close the window when is written Analysis Incomplete!!
Scroll and find out what is missing (could be an accelerogram file or a spectrum file) and ask for it.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Nexiz
  • Locked
  • Question Question
NL Pushover Analysis - Fiber Hinge
Replies
1
Views
2K
jmovalle
J
juandavidguzman
  • Locked
  • Question Question
SAP2000 Nonlinear Analysis Setup for Steel Design: Notial loads
Replies
2
Views
2K
STpipe
STpipe
JoeH78
  • Locked
  • Question Question
Hinge For Time History Analysis
Replies
2
Views
1K
JoeH78
JoeH78
ENGIRL
  • Locked
  • Question Question
Non linear analysis parameters definition
Replies
6
Views
1K
Celt83
Celt83
Bezujov
  • Locked
  • Question Question
Nonlinear analysis shell
Replies
1
Views
1K
NRam
NRam

Part and Inventory Search

Sponsor

Back
Top