Amada LC 2415 A3 3KW cutting parameters

[Skipper_SKG]

Hello.
i am the operator on an amada lc 2415 3kw laser machine. i would like some help with cutting parameters on galvanized steel in 1mm, 1.2mm, 1.5mm and 2mm.
thank you very much

 

[Merol.x1]

i need to know oscillator model fitted to your lc2415

 

[drossfree]

as a general rule i cut galavanized with the stainless steel cutting condition for the same thickness at %60 speed