When I added an alternative position view to one of the 4 shaded views in my drawing the line font for all visible edges in all of the views changed from solid to phantom. This change occurs both on the screen and on a hard copy of the drawing. Hiding the alternative view restores the visible edge line font to solid. Is this a known bug? The outline of the alternative positioned components are shown in a phantom line font, can this font be changed? If so how?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Alternative Position View
- Thread starter EUANS
- Start date
CorBlimeyLimey
Mechanical
Works fine in SW03 SP0. What are you using?
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
from Barrie, Ontario.
![[bigsmile]](/data/assets/smilies/bigsmile.gif "[bigsmile] [bigsmile]")
I love defenseless animals, especially in a good gravy.
faq559-863
from Barrie, Ontario. I love defenseless animals, especially in a good gravy. faq559-863
I have always had line font issues with alternate position views. I have a problem with the phantom font in the a-p view reverting from phantom back to solid. I work around this by putting the components in that view on a layer with phantom font.
As far as all the views changing....I got nothin'
![[bat]](/data/assets/smilies/bat.gif "[bat] [bat]")
"Great ideas need landing gear as well as wings."--C. D. Jackson
As far as all the views changing....I got nothin'
"Great ideas need landing gear as well as wings."--C. D. Jackson - Status
Similar threads
- Locked
- Question
- Locked
- Question